Menu
Your Cart

Tubb Precision Boron Nitride Refill

Tubb Precision Boron Nitride Refill
Out Of Stock
Tubb Precision Boron Nitride Refill
  • Stock: Out Of Stock
  • Model: BNCR
  • Dimensions: 3.00in x 3.00in x 1.00in
  • SKU: BNCR
258 sold
Product Views: 1688
$35.95

Tubb Precision Blended Boron Nitride Refill

The Tubb Precision Blended Boron Nitride Bullet Refill lets you easily coat thousands of bullets with no mess and no guesswork. Used extensively by David Tubb, most recently in his 2011 Wimbleton Cup and National Long Range Championship wins, the Tubb Precision Blended Boron Nitride Bullet Coating System uses a proprietary blend that has taken over ten years to perfect.

Why should you use our Boron Nitride Bullet Coating Kit? Boron Nitride coated bullets offer several distinct advantages over bare or moly coated bullets:
 
Unlike Moly coating, does not need a wax coating to hold it in place
Unlike Moly, Boron Nitride has no humidity issues
Moly out-gases at around 600 degrees, Boron Nitride out-gases above 2500 degrees

But the biggest reason to use Boron Nitride on your bullets, the most important advantage Boron Nitride coated bullets have over bare and Moly coated bullets is that the first shot from a cold, “dirty” barrel will go into the group (of all the subsequent shots). You can’t say this about Moly coated bullets, and in David’s experience, the first shots using Moly coatings usually go low, and bare bullets are unpredictable.

Boron Nitride coating radically reduces the elevation effects of cold (or hot) bore first shot velocity variations that have plagued shooters in the past. This means that the High Power competitor using Boron Nitride coated bullets will not have to worry about elevation changes from the first through successive shots. It means that the hunter taking that all-important first shot of the day can be confident it will go where it is aimed. And the tactical shooter will know that critical first shot will leave the barrl in the same velocity range and go into the same group as his subsequent shots.

As David says, “This is huge”

The Tubb Precision Boron Nitride Bullet Coating System is very easy to use, and comes with detailed instructions. This refill lets you coat approximately 10,000 50 grain projectils and approsimately 3,000 300 grain projectiles.

Write a review

Please login or register to review
Notification Module
This site uses cookies