Model: T7TS-RH
The Two-Stage trigger is the safest, best-performing design. The T7T designed by David Tubb is the best available option for installation on a Remington 700 trigger hanger platform.
The standard weight version (T7TS-(RH and LH)) is adjustable from 4 oz to 1 lb in the first stage and 1lb to ..
$350.00
Model: T7TH-RH
The Two-Stage trigger is the safest, best-performing design. The T7T designed by David Tubb is the best available option for installation on a Remington 700 trigger hanger platform.
The standard weight version (T7TS-(RH and LH)) is adjustable from 4 oz to 1 lb in the first stage and 1lb to ..
$350.00
Model: T7TH-LH
The Two-Stage trigger is the safest, best-performing design. The T7T designed by David Tubb is the best available option for installation on a Remington 700 trigger hanger platform.
The standard weight version (T7TS-(RH and LH)) is adjustable from 4 oz to 1 lb in the first stage and 1lb to ..
$350.00
-27 %
Model: DRI
When firing up or downhill, an uncorrected aiming point results in a high shot. The shooter must hold less elevation than the same shot fired across level ground. Knowing how much higher the bullet will impact becomes increasingly important as the distance to the target is increased, or as the ..
$55.00 $75.00
Model: 33XCREAMER
33XC Reamer:
This 33XC reamer is made by Manson Reamers. It is a floating pilot reamer. It has a .225 freebore which will accommodate both jacketed/leadcore bullets as well as turned solid bullets.
33XC reamer specs: .225 freebore (straight section) with a &nbs..
$255.00
Model: 37XCREAMER
37XC Reamer:
This 37XC reamer is made by Manson Reamers. It is a floating pilot reamer. It has a .225 freebore which will accommodate both jacketed/leadcore bullets as well as turned solid bullets.
37XC reamer specs: .225 freebore (straight section) with a 1 1/2 de..
$275.00
Model: REAM-6XC
Dave Manson 6XC finish reamer ground to David Tubb's optimum specs for the 115 DTAC bullet.
Provides optimized chamber dimensions for the 115 DTAC in either Peterson or Norma brass.
This 6XC reamer is made by Dave Manson. He is a well known reamer maker.
The reamer has the follo..
$215.00
Model: CSSAR15
Tubb Precision CS AR-15 Extractor/Ejector Spring set
"I believe these may very well be the most important springs in an AR-15 rifle. The extractor spring especially is a failure-prone and under-engineered part in most applications. If the extractor spring breaks, your rifle stops runnin..
$14.95
Model: T7TBRL
Bolt Release for the Tubb T7T two-stage trigger. Needed for Remington 700 actions to properly function the bolt release. Not required for Remington style custom actions such as Stiller, GA Precision, Surgeon, Defiance, BAT Machine, Barnard and many others which have side mounted bolt releases.
..
$10.00
Model: T7TBRR
Bolt Release for the Tubb T7T two-stage trigger. Needed for Remington 700 actions to properly function the bolt release. Not required for Remington style custom actions such as Stiller, GA Precision, Surgeon, Defiance, BAT Machine, Barnard and many others which have side mounted bolt releases.
..
$10.00
Model: BIPOD
A non-symmetrical bipod design featuring out-of-the-box concepts by David Tubb.
..
$299.00
Model: CSM1G
Tubb Precision CS M1 Garand Hammer Spring
The Tubb Precision CS M1 Garand Hammer Spring affords the shooter the opportunity to attain a better, more consistent trigger pull as well as speed up lock time of the M1 Garand. These are both very important assets to the Service Rifle shooter...
$8.95