FF kit 22 LR Rimfire (100 ct)
Average Rating:
Unlock the potential of your rimfire rifle or handgun!
FinalFinish .22 can have an impressive effect on smallbore firearms. Many production .22 rimfire rifles and pistols have much more potential for accuracy than their barrels allow.
Rimfire barrels respond very well to our exclusive multi-stage FinalFinish polishing treatment. Our tests have shown that some of the greatest accuracy enhancements documented for FinalFinish have come from treated .22 rimfires.
We're not saying that FinalFinish can create a match barrel overnight, but we have seen factory barrels surpass custom barrel status following a treatment. WIth good ammunition, group size reductions of over half are common.
Since we're shooting lead bullets, a smoother, polished bore means far less lead buildup. That will greatly extend the number of rounds that can be fired at optimum accuracy. Barrels also clean up much easier after a FinalFinish .22 treatment.
We also recommend FinalFinish .22 for use in that old favorite rimfire that's s had a few too many rounds put through it. After FinalFinish you might think it's been rebarreled! Additionally, even the most expensive competition firearms gain from proportioned use of FinalFinish .22. For these firearms we recommend using a few rounds of the finer compound bullets.
Since it's loaded ammunition, using it couldn't be easier. For a production rimfire barrel, clean the barrel before you start, shoot all 100 FinalFinish rimfire rounds in order, and then clean again when you're through.
You're done!
Detailed instructions are included with each kit.
BOX CONTAINS 100 LOADED ROUNDS
*LOADED AMMO FOR USA SALE ONLY & MUST SHIP BY UPS
By ordering loaded ammunition you are agreeing that you have read and accept the TERMS and CONDITIONS published on this website.
Number of Reviews: 1
- Barry
- 2012-01-08
The firearm treated was an S and W Model 617 10 shot revolver that just had its throat and breech face polished. The cartridge case of each round was wiped with a paper towel to remove excess abrasive residue. Some rounds were still slightly difficult to insert in the cylinder. After firing cartridge case ejection was only slightly harder than normal. The final finish treatment slightly improved group size at 15 yards hand held, but noticeably improved bench rest performance on 50 yard metallic targets. The barrel was also easier to clean after treatment. Rated 4 stars because of the need to wipe each round.
Please wait, your items are being added to the cart...
